Hold up. I’ve got an idea.
These emergency lights, they’ll run through the whole station and are likely connected to the same power source. That means it’s potentially one big network of lighting and relays. It should be possible to link up to the power grid and send a burst through it with a low enough signal not to short out the relays. If we can track that burst through the network, we might just be able to build up a map of the station. Our shuttle’s sensors are pretty weak, but this close to the station, we should be able to get a reading and have it relayed to our datapads.
What do you think Matsiyan? Could we use that generator and rig it up to create the burst? I should be able to get the sensors of the shuttle active from here to track the signal. If not, I’ll have to head back and do it manually from the shuttle’s control panel.